For Plastisol, Water-Based, Discharge
and DTG Digital White Ink!

15 Year Heater Warranty
Model Little Red X3-D - Infrared Conveyor Dryer
Model Little Red X3-D - Infrared Conveyor Dryer
 
 

The all-new multi-purpose LittleRed X3-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs.

It features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149ºC) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output.

The Little Red X3-D model is equipped with a 30 in. (76.2 cm) wide conveyor belt and three 24 in. (61 cm) wide infrared heaters (8900W @ 240V total

wattage) and can cure 360+ plastisol-printed garments/h, 185+ water-based or discharge-printed garments/h, and up to 51+ garments/h inkjet printed with digital white ink at 3 minutes dwell time.

With overall conveyor belt length of 88 in. (224 cm) long and 41 in. (104 cm) long heating chamber, the X3-D features a powerful 388 cfm (11 cmm) targeted exhaust system at standard to rapidly remove moisture and air contaminates from the heating chamber, as well as cool the skin and controls.

With a second X3 chamber, the LR-X3D-30-2 and LR-X3D-54-2 can handle higher production including longer times necessary for Kornit printers.

 

FLEXIBLE
Can cure plastisol, water-based, discharge and inkjet-printed white ink in record time

POWERFUL
8900W@240V total wattage

DEPENDABLE
Industry-leading 15-year heater warranty

EFFICIENT
Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing

FAST

  • 360+ garments/hr for plastisol inks
  • 185+ garments/hr for water-based or discharge inks
  • 51+ garments/hr for DTG digital white ink @ 3 minutes
  • 61+ garments/hr for DTG digital white ink @ 2.5 minutes

CONSISTENT
Low friction belt aligner and DC belt speed control with digital display

HEAVY DUTY
"X-Series" Conveyor Belt Roller Tracking System with Teflon coated fiberglass belt and HD belt motor

ACCURATE
Dual digital PID Temperature controller is accurate to +/-1°F

ADJUSTABLE
2 - 7 in. (5 - 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater

EXPANDABLE
Add additional chambers and belt extensions

OPTIONS

  • Additional heating chambers and conveyor belt extensions
  • Locking casters for mobility
  • Creeper gear
 
CE